Limit Switch
BSZ-15-RHS
Features
- High-Grade ABS Plastic body
- Contact Rating 15A/230VAC (resistive low)
- A wide variety of Operating Heads
- Dust, Water Proof & Oil Resistance Construction
RATING
| Rated Voltage | Non-inductive Load (A) | Inductive Load (A) | ||||||
| Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125VAC | 15 | 3 | 1.5 | 15 | 5 | 2.5 | ||
| 250VAC | 15 | 2.5 | 1.25 | 15 | 3 | 1.5 | ||
| 500VAC | 3 | 1.5 | 0.75 | 2.5 | 1.5 | 0.75 | ||
| 8VDC | 15 | 3 | 1.5 | 1.5 | 5 | 2.5 | ||
| 14VDC | 15 | 3 | 1.5 | 10 | 5 | 2.5 | ||
| 30VDC | 6(2) | 3 | 1.5 | 5 | 5 | 2.5 | ||
| 125VDC | 0.4 | 0.4 | 0.05 | 0.05 | ||||
| 250VDC | 0.2 | 0.2 | 0.03 | 0.03 | ||||
CHARACTERISTICS
| Operating Speed | 0.01mm-1m/sec |
| Operating Frequency | Mechanical: 20 operations/min. |
| Contact Resistance | 15mΩ max. (initial value) |
| Insulation Resistance | 100mΩ min. (below 500VDC) |
| Dielectric Strength | 1000VAC, 50/60Hz for 1 minute between terminals of the same polarity |
| 1500VAC, 50/60Hz for 1 minute between current-carrying and non-current metal parts | |
| 1500VAC, 50/60Hz for 1 minute between each terminal and ground | |
| Vibration | 10-55Hz,1.5mm double amplitude |
| Shock | Mechanical durable: 1,000m/sec2 (about 100G'S) |
| Electrical: 300m/sec2 (about 30G'S) | |
| Ambient temperature | -15℃ to 80℃(with no icing) |
| Humidity | General purpose type: 35-85% RH |
| Sealed type: 35-95% RH max | |
| Life | Electical: 500,000 operations above |
| Degree of protection | IP66 (IEC Standard) |
OPERATING CHARACTERISTICS
| MODEL | BSZ-15-H | BSZ-15-HS | BSZ-15-RH | BSZ-15-RHS | BSZ-15-PS | BSZ-15-P | BSZ-15-RP | BSZ-15-RPC |
| Operating Force (Max.) | 0.69N | 1.57N | 1.27N | 1.57N | 2.45~3.43N | 2.45~3.43N | 2.45~3.43N | 2.45~3.43N |
| Release Force (Min.) | 0.14N | 0.27N | 0.21N | 0.41N | 1.12N | 1.12N | 1.12N | 1.12N |
| Pre Travel (Max.) | 5.6mm | 2mm | 4mm | 2.4mm | 0.4mm | 0.4mm | 0.4mm | 0.4mm |
| Over Travel (Min.) | 1.27mm | 1mm | 1.6mm | 0.5mm | 1.6mm | 5.5mm | 3.58mm | 3.58mm |
| Movement Diferential (Max.) | 28.2mm | 24.8mm | 36.5mm | 32.5mm | 0.5mm | 0.5mm | 0.5mm | 0.5mm |
| Operating Position (Min.) | 19±0.8mm | 19±0.8mm | 30.2±0.8mm | 30.2±0.4mm | 21.5±0.5(mm) | 21.8±0.8(mm) | 33.±1mm(5)mm | 33.±1mm(5)mm |
| MODEL | DESCRIPTION |
| BSZ-15-H | Hing Lever |
| BSZ-15-HS | Short Hinge Lever |
| BSZ-15-RH | Roller Hing Lever |
| BSZ-15-RHS | Roller Short Hing Lever |
| BSZ-15-PS | Short Pin Plunger |
| BSZ-15-P | Pin Plunger |
| BSZ-15-RP | Roller Pin Plunger |
| BSZ-15-RPC | Cross Roller Pin Plunger |
